(3650) - CASE IH ROUND TIE BALER (1/84-12/88) (10) - HYDRAULIC SYSTEM AND LATCH Case Agriculture

发表于 2022-10-16 03:10:01

0次 0 0

Pos.	Part No	Qty	Parts name	Comments
1.	REF	[2]	INSTRUCTION	NH COUPLER - hydraulic (See Page 15)
2.	ZA105685	[1]	FITTING	IH - restrictor (.052 inch orifice)(P.I.N. 001531 and after)
3.	129768C1	[2]	HYDRAULIC HOSE	IH HOSE ASSEMBLY - 115 inch (2921 mm) long
4.	27291R1	[16]	CLAMP	IH - hose Superseded by part number: 9827902
5.	76355	[2]	TEE,9/16" - 18 JIC x 9/16" - 18 JIC x 9/16" - 18 JIC	BHB - 3/8 tube x 9/16 - 18 inch thread
6.	1264172C2	[4]	HYDRAULIC HOSE,6.40 mm ID x 2665.00 mm, SAE 100R1	IH HOSE ASSEMBLY - 105 inch (2667 mm) long (Replaces ZA105138)
7.	ZA105118	[3]	GUIDE	IH - hose
8.	611344R1	[8]	WASHER	IH - flat, 11/32 x 11/16 x 1/16 inch (8 x 17 x 1 mm) Superseded by part number: 495-61034
. .	9635884	[8]	BOLT,Hex, 5/16" - 18 1", Full Thd, Gr 5	NH - hex, 5/16 NC x 1 inch
9.	333934R1	[4]	ELBOW,90 Degree, 9/16"-18, 37 Degree x 3/8"-18, NPTF	IH - 90 degree, 3/8 NPTF Superseded by part number: 235131
10.	ZA103758	[2]	VALVE	IH - rotary (Replaces ZA105143) (Also furnish nipple 443981)
11.	ZA105081	[1]	LATCH	IH
. .	180177	[2]	BOLT,Hex, 1/2" - 13 x 1 1/2", Gr 5	IH - hex, 1/2 NC x 1-1/2 inch Superseded by part number: 113-410
12.	21883R1	[8]	WASHER	IH - flat, 17/32 x 1-3/4 x 3/32 inch (13 x 44 x 2 mm) Superseded by part number: 632076R1
13.	ZA761370	[1]	SPRING	IH
14.	1281009C1	[2]	INSERT	IH PLUG - spring
15.	120378	[2]	NUT,Hex, 1/2" - 13, Gr 5	IH NUT, 1/2"-13, G5 Superseded by part number: 280431
16.	Q822	[2]	BOLT	IH - hex, 1/2 NC x 5-1/2 inch Superseded by part number: 1980713C1
17.	118777	[8]	WASHER	IH - flat, 17/32 x 1-1/16 x 3/32 inch (13 x 26 x 2 mm) Superseded by part number: 86624188
18.	ZA105108	[2]	BAR	IH STIFFENER
19.	96339C1	[2]	CAMSHAFT BEARING,0.3752" ID x 1.25" OD x 0.8025"	IH - cam follower (Replaces ZA015882)
20.	9413967	[4]	LOCK NUT,1/2"-13, GB	IH NUT - hex lock, 1/2 inch NC Superseded by part number: 86992215
22.	23276R1	[2]	WASHER	IH - flat, 21/32 x 2 x 3/16 inch (16 x 50 x 4 mm) Superseded by part number: 495-81030
. .	426-1040	[2]	BOLT,Hex, 5/8" - 11 x 2-1/2", Gr 8	CAS - hex, 5/8 NC x 2-1/2 inch Superseded by part number: 280233
23.	1337296C1	[2]	SPACER	CAS - (Replaces 754598R1) Superseded by part number: 700120067
24.	20601R1	[2]	WASHER	IH - flat, 17/32 x 1-1/4 x 1/8 inch (13 x 31 x 3 mm) Superseded by part number: 495-81287
25.	ZA104551	[2]	PIN	IH
26.	ZA105060	[2]	CLIP	IH BRACKET - offset
. .	180124	[4]	BOLT,Hex, 3/8" - 16 x 1 1/4", Gr 5	IH - hex, 3/8 NC x 1-1/4 inch Superseded by part number: 88011
27.	ZA250536	[4]	YOKE	IH Superseded by part number: 87312625
28.	120371	[4]	NUT,1/2"-20, G5	IH Superseded by part number: 280963
29.	ZA105132	[2]	ROD	IH - latch Superseded by part number: 700120078
30.	ZA105126	[1]	PIN	IH - left Superseded by part number: 700120079
30.	ZA105125	[1]	PIN	IH - right Superseded by part number: 700120082
31.	614452R1	[4]	WASHER	IH - flat, 13/32 x 1-1/4 inch x 1/8 inch (10 x 31 x 3 mm) Superseded by part number: 86625257
32.	ZA105122	[2]	ARM	IH
33.	407210R1	[2]	CLIP	IH PIN - klik (Package of 20)
34.	32-1632	[8]	COTTER PIN,1/4" x 2"	CAS PIN, SPLIT (COTTER), 1/4" x 2" Superseded by part number: 88182
35.	63196C1	[4]	PIN	IH - clevis Superseded by part number: 427-16400
36.	591715R1	[8]	WASHER	IH - flat, 1-1/32 x 1-1/2 x 1/16 inch (26 x 38 x 1 mm) Superseded by part number: 86624169
. .	ZA207021	[1]	BASE	CAS Superseded by part number: 737734
38.	ZA105000	[2]	CYLINDER	CAS - hydraulic (Replaces ZA105150) (See Page 13) Superseded by part number: 700709594
39.	443981	[1]	CONNECTOR, ELEC	IH NIPPLE - auto pipe, 3/8 NPTF (Used with valve ZA103758 only) Superseded by part number: 217-1081