(8650) - CASE IH BALE WRAPPER (1/97-12/97) (2-46) - AUTOMATIC FILM CUT AND CLAMP, 8630, 8640, 8650, ELECTRONIC CONTROL, 8640, 8650, CABLE CONTROL Case Agriculture

发表于 2022-10-16 03:10:02

0次 0 0

Pos.	Part No	Qty	Parts name	Comments
1.	276845A1	[1]	BODY	CAS housing
2.	276848A1	[1]	PLATE	CAS cover
3.	614-6016	[6]	BOLT,Hex, M6 x 1 x 16mm, Cl 8.8, Full Thd	CAS Superseded by part number: 86508568
4.	895-11006	[4]	WASHER,6.6mm ID x 12mm OD x 1.6mm Thk	CAS Superseded by part number: 86588450
5.	864-6016	[4]	HEX SOC SCREW,M6 x 16mm, Cl 8.8	CAS Superseded by part number: 14305221
6.	313093A1	[2]	PLATE	CAS 200 mm
7.	832-10410	[4]	NUT,M10 x 1.5, Cl 8	CAS If Used Superseded by part number: 190003888452
8.	829-4410	[2]	THIN NUT,Thin, M10 x 1.5, Cl 05	CAS Superseded by part number: 934300R1
9.	614-10025	[10]	BOLT,Hex, M10 x 1.5 x 25mm, Cl 8.8	CAS Superseded by part number: 11106231
10.	276882A1	[2]	PLUNGER	CAS
11.	276883A1	[2]	BUSHING	CAS
13.	276870A1	[2]	RETAINER	CAS
. .	276869A1	[1]	PLATE	CAS BRACKET ASSY., order: 14 and 19 Superseded by part number: 313089A1, 313088A1
14.	313089A1	[1]	PLATE	CAS BRACKET ASSY., replaces: 276869A1 round bale
14.	319091A1	[1]	PLATE	CAS BRACKET ASSY., replaces: 276869A1 round/rectangular bale #8630, (DBG0000522 -) #8650, (DBG0004026 -)
15.	276871A1	[1]	WEAR PAD	IH
15.	319093A1	[1]	PAD	CAS round/rectangular #8630, (DBG0000522 -) #8650, (DBG0004026 -)
16.	276872A1	[1]	WEAR PAD	IH
16.	319094A1	[1]	PAD	CAS round/rectangular bale #8630, (DBG0000522 -) #8650, (DBG0004026 -)
17.	276865A1	[1]	PLATE ASSY.	CAS
17.	319090A1	[1]	CLAMP	CAS PLATE ASSY., round/rectangular bale #8630, (DBG0000522 -) #8650, (DBG0004026 -)
18.	276867A1	[1]	COMPRESSION SPRING	CAS
. .	276864A1	[1]	BRACKET	CAS ASSY., order: 14 and 19 Superseded by part number: 313088A1, 313089A1
19.	313088A1	[1]	BRACKET	CAS ASSY., replaces: 276864A1 round bale
19.	319089A1	[1]	CLAMP	CAS BRACKET ASSY., replaces: 276864A1 round/rectangular bale #8630, (DBG0000522 -) #8650, (DBG0004026 -)
20.	276873A1	[2]	KNIFE	CAS clamp
21.	840-1612	[2]	SCREW,Pan, M6 x 12mm, Cl 4.8	CAS Superseded by part number: 86511828
22.	277085A1	[1]	KNIFE	IH sets of 5
23.	832-10406	[2]	NUT,M6 x 1, Cl 8	CAS
24.	814-10080	[4]	BOLT,Hex, M10 x 1.5 x 80mm, Cl 8.8	CAS Superseded by part number: 129796A1
25.	276868A1	[1]	BODY	CAS CLAMP
26.	276866A1	[2]	COIL SPRING	CAS
27.	814-16090	[4]	BOLT,Hex, M16 x 2 x 90mm, Cl 8.8	CAS Superseded by part number: 350616
28.	892-11016	[4]	LOCK WASHER,16.4mm ID x 27.4mm OD x 5mm Thk	CAS Superseded by part number: 87016618
29.	219-14	[4]	LUBE NIPPLE,1/4" NPTF	CAS
31.	276847A1	[2]	PLATE	CAS
32.	276878A1	[1]	HOUSING	CAS
33.	276874A1	[1]	MOUNTING PARTS	CAS PLATE ASSY.
34.	295109R91	[2]	BALL BEARING	IH ball Superseded by part number: 84188095
35.	800-1125	[1]	SNAP RING,M25, Ext	CAS Retaining Superseded by part number: 370002
36.	276877A1	[1]	FIXING BRACKET	CAS
37.	276876A1	[1]	SOLENOID	CAS
38.	829-1406	[2]	NUT,Hex, M6 x 1, Cl 10.9	CAS Superseded by part number: 86500688, 87778396
39.	877-10816	[2]	SET SCREW,Hex Skt, M8 x 16mm, Cup Pt	CAS M8 x 16 Superseded by part number: 300477
40.	276875A1	[1]	SHAFT	CAS
41.	284397A1	[1]	SLEEVE	CAS rubber
30.	895-11010	[8]	WASHER,11mm ID x 20mm OD x 2mm Thk	CAS 11 x 21 x 2 mm Superseded by part number: 14496621