(241) - INTERNATIONAL HARVESTER BIGROLL ROUND BALER (1/74-12/79) (A-31) - SHIELDS Case Agriculture

发表于 2022-10-16 03:10:02

0次 0 0

Pos.	Part No	Qty	Parts name	Comments
1.	208611C1	[1]	SHIELD	IH cylinder RH
. .	16897R1	[3]	CARRIAGE BOLT,Short Nk, 5/16" - 18 x 3/4", Gr 2, Full Thd	IH BOLT, 5/16 x 3/4 crg type 1 Superseded by part number: 412-512
. .	938017R1	[3]	FLANGE NUT,Flg, USR, 5/16"-18	IH 5/16 flange lock Superseded by part number: 145458
2.	208609C4	[1]	SHIELD	IH inner RH
. .	12872R1	[1]	BOLT,Short NK, 5/16"-18 x 1", G2, Full Thd	IH CARRIAGE, Short NK, 5/16"-18 x 1", G2, Full Thd Superseded by part number: 598803R1
. .	22859R1	[1]	WASHER	IH 11/32 x 3/4 x 7 ga znd Superseded by part number: 495-81113
. .	18673R1	[7]	CARRIAGE BOLT,Short Sq Nk, 5/16" - 18 x 1/2", Gr 2	IH BOLT, 5/16 x 1/2 crg type 1 Superseded by part number: 411-58
3.	208610C1	[1]	SHIELD	IH cylinder LH
4.	208608C4	[1]	SHIELD	IH inner LH
5.	549152R1	[2]	COVER	IH reel shaft
. .	26056R1	[1]	SCREW, 3/8-16 x 5/8 znd hex washer-hd tap
6.	218995C91	[1]	SHIELD	IH ASSY W/PRODUCT GRAPHIC, main drive, serial No. 7810 and below Superseded by part number: 218995C92
6.	219095C92	[1]	SHIELD	IH ASSY W/PRODUCT GRAPHIC MAIN DRIVE, serial No. 7811 and above
. .	164603C1	[1]	THUMB SCREW,3/8" - 16 x 5/8"	IH BOLT, 3/8-16 x 5/8 wing tap.
7.	210304C1	[1]	SHIELD	IH stripper end upper
8.	219047C91	[1]	TUBE	IH ASSY W/PRODUCT GRAPHIC, PTO shaft safety, serial No. 3711 and up
8.	204698C92	[1]	SHAFT	IH PTO SHAFT SHIELD SERVICE PACKAGE, serial No. 501 thru 3711, consist of the following Superseded by part number: 473443R1, 219047C91
. .	25178R1	[1]	BOLT, 3/8 x 3/4 dld type 1
. .	18778R1	[1]	SCREW,Hex, 3/8"-16 x 3/4", G2	IH BOLT, 3/8 x 3/4 type 1 Superseded by part number: 180120
. .	120377	[2]	NUT,3/8" - 16, Gr 5	IH Superseded by part number: 280136
. .	473443R1	[1]	COTTER PIN	IH quick attachable cot.
9.	219007C91	[1]	COVER ASSY	IH WPRODUCT GRAPHIC, clutch
. .	669637R1	[1]	SELF-TAP SCREW	IH 5/16-18 x 1/2 znd self-tap. washer type 4
10.	219005C91	[1]	SHIELD	IH W/PRODUCT GRAPHIC, lower roll, serial No. 7810 and below
11.	219006C91	[1]	SHIELD	IH W/PRODUCT GRAPHIC, RH tapered roll, serial No. 7811 and above
12.	218147C1	[1]	SUPPORT ASSY.	IH SUPPORT, mounting, serial No. 7811 and above
. .	19570R1	[1]	BOLT,Hex, 1/4" - 20 x 5/8", Gr 2	IH 1/4 x 5/8 type 1 Superseded by part number: 280641
. .	938016R1	[1]	FLANGE NUT,Flg, USR, 1/4"-20	IH 1/4 flange lock Superseded by part number: 523282