(RB454) - CASE IH ROUND BALER (7/07-1/14) (14.20) - SLEDGE Case Agriculture

发表于 2022-10-16 03:10:02

0次 0 0

Pos.	Part No	Qty	Parts name	Comments
1.	86620027	[2]	FLANGED BEARING,80.02mm ID x 147.6mm OD x 4mm Thk	NH Bearing
2.	412441	[1]	ROLLER BEARING,40mm ID x 80mm OD x 21mm W, Round Bore	PA & Collar
3.	86636673	[1]	HUB	NH RH
4.	87644299	[1]	FRAME	POL Sledge
5.	9806396	[3]	SUPPORT	NH Incl in 6
6.	84415463	[1]	FLANGED BEARING	NH Incl 5
7.	170055	[1]	KEY	ZED Superseded by part number: 80170055
8.	87025815	[1]	SHIELD	PA
9.	87390122	[1]	ROLL	NH Stripper
9.	87499903	[1]	ROLL	GI Hemp Stripper, Optional
10.	87611564	[1]	ROLL	NH Pivot
11.	86527218	[1]	CHAIN,378mm L	NH 15"
12.	87052121	[2]	GEAR	NH Roll, 24T
13.	86619670	[1]	SHIELD	NH
14.	9803325	[2]	SUPPORT	NH Dimple Roll
15.	9843939	[1]	CAP	NH
16.	9806931	[1]	IDLER GEAR,17T	NH 17T, Sledge Roll Drive, Incl 45 - 47
17.	86637157	[1]	SHIELD	NH
18.	86636786	[1]	HUB	NH LH
19.	87398962	[2]	HUB,12.5mm ID x 47.42mm OD x 13.2mm L	PA
20.	86636893	[1]	BUSHING,27.18mm ID x 47.63mm OD x 34mm L	NH Bearing Mount
21.	87602972	[1]	SHIELD	NH
22.	9706704	[1]	BOLT,Hex, M10 x 1.5 x 41.58mm, Cl 8.8	NH
23.	88206	[1]	BOLT,Hex, 3/8" - 16 x 1", Gr 5	NH
24.	88011	[1]	BOLT,Hex, 3/8" - 16 x 1 1/4", Gr 5	NH
25.	43140	[4]	BOLT,Hex, M10 x 1.5 x 30mm, Cl 8.8	NH
26.	120068	[2]	BOLT,Hex, M10 x 40mm, Cl 8.8	NH
27.	9706687	[5]	BOLT,M12 x 1.75 x 30mm, Cl 8.8	NH
28.	412087	[2]	BOLT,Hex, M12 x 1.75 x 45mm, Cl 10.9, Full Thd	BHB Superseded by part number: 86639031
29.	9706693	[1]	BOLT,M12 x 60mm, Cl 8.8	NH
30.	81972	[16]	HEX SOC SCREW,5/16" - 18 x 1-3/4"	GI
31.	374892	[2]	CARRIAGE BOLT,M10 x 1.5 x 40mm, Cl 8.8	NH
32.	86516319	[1]	PLOW BOLT,7/16" - 14 x 1 3/4", Gr 5	NH
33.	281004	[4]	PLOW BOLT,#3, 3/8" - 16 x 1 1/4", Gr 5, Full Thd	GI
34.	9824667	[1]	WASHER,60mm ID x 71mm OD x 2.7mm Thk	NH Superseded by part number: 86637167
35.	81541	[2]	WASHER,0.5" ID x 1.25" OD x 0.08" Thk	NH
36.	140046	[5]	BELLEVILLE WASHER,M12 Bolt Size x 27mm OD x 1.8mm Thk	NH
37.	140045	[5]	BELLEVILLE WASHER,M10 Bolt Size x 22mm OD x 1.6mm Thk	NH
38.	80680	[4]	LOCK WASHER,3/8 0.381 CST ZND	NH
39.	9628503	[4]	NUT,3/8"-16, G5	NH
40.	9804278	[2]	FLANGE NUT,M10 x 1.5, Cl 8	NH
41.	87517	[2]	NUT,7/16"-14, GB	NH Superseded by part number: 280980
42.	29684	[2]	WASHER,13.5mm ID x 50.8mm OD x 5.52mm Thk	NH
43.	86624647	[1]	WASHER,10.8mm ID x 57mm OD x 6.1mm Thk	NH
44.	168104	[2]	SNAP RING,#177, Ext	GI
45.	9824626	[1]	SNAP RING,2.812", Int, #283	WIN
46.	86637167	[1]	WASHER,61.2mm ID x 71.8mm OD x 2.7mm Thk	NH Hardened, M60
47.	9808112	[1]	BALL BEARING,34.99mm ID x 71.88mm OD x 25mm W	NH
48.	NSS	[3]	NOT SOLD SEPARAT	CON Bearing