(RB455) - CASE IH ROUND BALER - NORTH AMERICA (1/14-12/15) (62.140.AQ[03]) - VAR - 727159 - BALE TENSION TAKE UP ARM AND ONE SPRING WITH LOOP ROLL, SINGLE HYD. CYLINDER, IN CAB CONTROL, YFN188619 AND AFTER Case Agriculture

发表于 2022-10-16 03:10:02

0次 0 0

Pos.	Part No	Qty	Parts name	Comments
1.	47689083	[1]	ARM	NH Take Up
2.	47512226	[1]	ROLL	PLO Rear Serpentine, Loop, Incl 36
3.	9823372	[2]	SHAFT,1135mm L	NH Incl 38
4.	87023400	[2]	SUPPORT	PA
5.	86636983	[2]	LINK,326mm L	NH
6.	87654704	[1]	SPRING	PLO
7.	9617265	[2]	BAND	NH
8.	86636552	[2]	BEARING CAP	NH
9.	86637228	[1]	PIN,38.1mm OD x 91.5mm L	NH
10.	257163	[2]	WASHER,25.4mm ID x 50.8mm OD x 4.17mm Thk	NH
11.	0C	[1]	ORDER COMPONENTS	NH
12.	87654703	[1]	PIVOT	PLO
13.	84356720	[1]	ROLL,88.9mm OD x 1142mm L	PLO Front Serpentine, Incl 37
14.	86627635	[4]	BOLT,Hex, M12 x 1.75 x 30mm, Cl 10.9	NH
15.	9804264	[2]	FLANGE BOLT,M10 x 50mm, 26mm Thd, Cl 8.8	NH Superseded by part number: 16587625
16.	100037	[2]	LOCK NUT,M10 x 1.5, Cl 8	NH
17.	280954	[1]	NUT,3/4"-10, G5	NH
18.	86511191	[1]	WASHER,0.81" ID x 2" OD x 0.15" Thk	NH
19.	633038	[1]	THREADED ROD,3/4" - 10 x 11-1/2" L	NH
20.	9804268	[4]	BOLT,Hex, M12 x 40mm, Cl 8.8, Full Thd	NH
21.	87364	[4]	WASHER,0.53" ID x 1.06" OD x 0.1" Thk	NH
22.	86619803	[4]	FLANGE NUT	NH
23.	87400	[2]	COTTER PIN,3/16" x 2"	WIN
24.	28581	[4]	WASHER,38.9mm ID x 60.3mm OD x 3.5mm Thk	NH Superseded by part number: 86611730
25.	9849647	[1]	NUT,7/8"-9, G5	NH
26.	87314	[1]	JAM NUT,Jam, 7/8"-9, G2	NH
27.	86050286	[4]	FLANGE BOLT,M10 x 20mm, Cl 8.8	NH
28.	9846489	[1]	SPRING,Compression, 1.81" OD x 9.44" L	NH
29.	47527692	[2]	SHIM,54mm OD x 0.4mm Thk	PLO
30.	9845575	[1]	SCRAPER BLADE	NH
31.	87040645	[1]	ANGLE	PA
32.	86516322	[2]	SUPPORT	NH Superseded by part number: 87654792
33.	768624	[2]	SPACER	PA Superseded by part number: 86636659
34.	625098	[1]	PIVOT	NH
35.	9804258	[8]	BOLT,Hex, M8 x 1.25 x 20mm, Cl 8.8	NH
36.	47504953	[2]	BEARING HOUSING,73mm ID x 106.1mm OD x 30mm Thk	NH Incl 37
37.	84259867	[2]	BALL BEARING,38.1mm ID x 80mm OD x 22mm W	PLO
38.	130045	[2]	PIN,5mm OD x 26mm L, Slotted	NH