(RBX451) - CASE IH ROUND BALER (12/01-10/02) (035) - SHIELDING, LH Case Agriculture

发表于 2022-10-21 03:10:06

0次 0 0

Pos.	Part No	Qty	Parts name	Comments
1.	86529373	[2]	HINGE	NH
2.	686514	[1]	LATCH	NH
3.	45071	[2]	RUBBER WASHER	NH
4.	86625618	[1]	DOOR ASSY.	NH Upper, LH
5.	86627360	[1]	SUPPORT ASSY.	NH
6.	86000448	[2]	LATCH	NH
7.	9617869	[2]	BUMPER,28.4mm W x 31.8mm L x 4.8mm Thk	NH
8.	86628973	[1]	BRACKET	NH
9.	9840986	[2]	CLIP	NH
10.	86520136	[4]	RIVET,Aluminum, .196” Dia	NH
11.	86625625	[1]	LATCH ASSY.	NH
12.	E9NN16N738AB	[2]	LATCH	NH Superseded by part number: 81866169
13.	86629880	[1]	DOOR ASSY.	NH Lower, LH, Includes: Ref. 41
14.	86614489	[1]	HINGE	NH
15.	86614490	[1]	ROD	NH Hinge
16.	86627083	[1]	ANGLE	NH
17.	86620940	[1]	SHIELD	NH
18.	86620935	[1]	STEP	NH LH
19.	86629879	[1]	SHIELD	NH Includes: Ref. 42
20.	284422	[2]	BUMPER	NH
21.	86520316	[1]	SHIELD	NH
22.	86620936	[1]	STEP	NH RH
23.	86637145	[1]	ANGLE BAR	NH
24.	86625651	[1]	SHEET ASSY.	NH Wrapper, LH
25.	495-21038	[2]	WASHER,5/16"	CAS Superseded by part number: 80664, 72187263
26.	492-11044	[4]	LOCK WASHER,7/16"	CAS Superseded by part number: 81547
27.	495-11047	[4]	WASHER,7/16", SAE	CAS Superseded by part number: 87363
28.	832-46406	[4]	NUT,M6 x 1, Cl 8	CAS Superseded by part number: 353308
29.	825-5146	[13]	SERRATED NUT,M6, Flg Ser	CAS Superseded by part number: 86511444
30.	844-6020	[12]	BOLT,Hvy Hex, M6 x 20mm, Cl 8.8	CAS Superseded by part number: 9804256
31.	844-8020	[5]	BOLT,Hvy Hex, M8 x 20mm, Cl 8.8	CAS Superseded by part number: 9804258
32.	614-8030	[4]	BOLT,Hex, M8 x 1.25 x 30mm, Cl 8.8, Full Thd	CAS Superseded by part number: 43128
33.	825-5148	[27]	SERRATED NUT,M8, Flg Ser	CAS Superseded by part number: 86505868
34.	811-6016	[1]	CARRIAGE BOLT,Sht Sq Nk, M6 x 1 x 16mm, Cl 8.8	CAS Superseded by part number: 86512439
35.	9706703	[4]	CARRIAGE BOLT,Sht Sq Nk, M6 x 1 x 20mm, Cl 8.8, Full Thd	NH
36.	811-8020	[18]	CARRIAGE BOLT,Sht Sq Nk, M8 x 1.25 x 20mm, Cl 8.8	CAS Superseded by part number: 86507486
37.	811-10020	[4]	CARRIAGE BOLT,Sht Sq Nk, M10 x 1.5 x 20mm, Cl 8.8	CAS Superseded by part number: 86512422
38.	825-1410	[4]	NUT,M10, Cl 8	CAS Superseded by part number: 100016
39.	432-612	[2]	COTTER PIN,3/32" x 3/4"	CAS Superseded by part number: 280250
40.	495-21031	[4]	WASHER,1/4"	CAS Superseded by part number: 80701, 72187262
41.	86631518	[1]	DANGER DECAL	NH English
41.	86632801	[1]	DECAL	NH DANGER, French
42.	9826789	[1]	DANGER DECAL,180mm x 90mm H	NH DANGER, English
42.	9827448	[1]	DANGER DECAL	NH French