(RBX561) - CASE IH ROUND BALER (12/01-8/02) (027) - NET-TWINE WRAPPER, BALE SIZE & WRAP ACTUATOR SENSING Case Agriculture

发表于 2022-10-23 03:10:02

0次 0 0

Pos.	Part No	Qty	Parts name	Comments
1.	9847465	[1]	CHANNEL	NH
2.	825-1408	[2]	NUT,M8, Cl 8	CAS Superseded by part number: 43362
3.	814-8035	[1]	BOLT,Hex, M8 x 1.25 x 35mm, Cl 8.8	CAS Superseded by part number: 412479
4.	9847466	[2]	BUSHING,8.25mm ID x 12.75mm OD x 10.26mm L	NH
5.	432-812	[1]	COTTER PIN,3/4" OAL x 1/8" W	CAS Superseded by part number: 80756
6.	9615829	[1]	ARM	NH
7.	87758	[2]	SCREW,Truss HD, #8 - 32 x 1"	NH
8.	9607595	[1]	POTENTIOMETER,5 VDC	NH Full Bale Sensor Superseded by part number: 3980855
9.	225-14108	[2]	NUT,#8-32	CAS Superseded by part number: 86977693
10.	84821	[1]	SCREW,Truss HD, #10 - 24 x 1/2"	NH
11.	492-11010	[1]	LOCK WASHER,#10	CAS Superseded by part number: 80684
12.	225-14110	[1]	NUT,#10-24	CAS Superseded by part number: 87304
13.	300383	[2]	BOLT,Hex, M10 x 1.5 x 16mm, Cl 8.8, Full Thd	NH
14.	495-21044	[10]	WASHER,3/8"	CAS Superseded by part number: 87779090, 80702
15.	825-51410	[2]	FLANGE NUT,M10, Flg Ser	CAS Superseded by part number: 43435
16.	614-8020	[3]	BOLT,Hex, M8 x 1.25 x 20mm	CAS Superseded by part number: 120104
17.	495-21038	[2]	WASHER,5/16"	CAS Superseded by part number: 80664, 72187263
18.	9822330	[1]	BAR	NH
19.	633492	[2]	SPACER	NH
20.	825-5148	[5]	SERRATED NUT,M8, Flg Ser	CAS Superseded by part number: 86505868
21.	263117	[13]	CABLE TIE,292.1mm L, Nylon, Black	NH CABLE STRAP
22.	9843435	[1]	ACTUATOR	NH Twine
. .	9843435R	[1]	REMAN-ELECTRIC ACTUATOR	NH RBX561 (12/01-8/02)
. .	9843435C	[1]	CORE-ELECTRIC ACTUATOR	NH Return Number
23.	86624226	[1]	HARNESS	NH WIRE, Twine Only, Refer to Fig. 029
23.	86592582	[1]	WIRE HARNESS	NH Net & Twine, Refer to Fig. 030
24.	515-2163	[2]	WIRE CLAMP,1/8", Insul, 1/4" Bolt	CAS Superseded by part number: 80272535
25.	614-6016	[3]	BOLT,Hex, M6 x 1 x 16mm, Cl 8.8, Full Thd	CAS Superseded by part number: 86508568
26.	492-11025	[1]	LOCK WASHER,1/4"	CAS Superseded by part number: 72187247, 80682
27.	825-1406	[3]	NUT,M6, Cl 8	CAS Superseded by part number: 86500688
28.	515-23143	[2]	CLAMP,9/16", Insul, 3/8" Bolt	CAS Superseded by part number: 257492, 72187280
29.	495-11028	[3]	WASHER,1/4", SAE	CAS Superseded by part number: 87361, 72187256
30.	832-46406	[2]	NUT,M6 x 1, Cl 8	CAS Superseded by part number: 353308
31.	86517891	[1]	WIRE HARNESS	NH Extension
32.	515-2195	[2]	CLAMP,3/8", Insul, 1/4" Bolt	CAS Superseded by part number: 86050346
33.	102043	[1]	GROMMET,19.05mm ID x 34.925mm OD x 11.11mm Thk	NH
34.	9848810	[2]	SWITCH	NH Hall Effect, Twine Sensing Superseded by part number: 87019854
35.	86625322	[1]	CONTROL UNIT	NH Superseded by part number: 87035281
35.	87035281R	[1]	REMAN ELECT CONTROL	MKT Controller ECU
35.	87035281C	[1]	CORE-ELECTRONIC CONT	MKT Return Number, ELECTRONIC CONTROL UNIT
. .	86625322C	[1]	CORE-ELECTRONIC CONT	MKT Return Number, ELECTRONIC CONTROL UNIT - for N.A. Only
. .	86529089	[1]	RELAY	NH
36.	231-5145	[16]	SERRATED NUT,Flg, USR, 5/16"-18	CAS Superseded by part number: 72187067, 145458
37.	264795	[4]	ELECTRIC INSULATION	NH
38.	811-6016	[4]	CARRIAGE BOLT,Sht Sq Nk, M6 x 1 x 16mm, Cl 8.8	CAS Superseded by part number: 86512439
39.	825-5146	[6]	SERRATED NUT,M6, Flg Ser	CAS Superseded by part number: 86511444
40.	86509324	[2]	PLATE	NH
41.	578070	[1]	CLAMP,19mm, Coat, 8.7mm Bolt Hole, P Type	NH
42.	86552546	[1]	WIRE CLAMP	NH 2", 5/16" Bolt, Black
43.	9841747	[1]	BRACKET	NH
44.	694181	[4]	MAGNET	NH
45.	788614	[1]	PROTECTING COVER	NH
46.	86500902	[1]	POTENTIOMETER,3000 Ohm, 16 VDC	NH Duckbill Sensor, Net Only Superseded by part number: 86977396
47.	86509329	[1]	MOUNTING PLATE	NH Includes: Bushing 86509761, Net Only Superseded by part number: 87362420
48.	100-3437	[1]	SNAP RING,#37, Ext	CAS Superseded by part number: 86000439
49.	493-41020	[4]	LOCK WASHER,Ext Tooth, #10	CAS Superseded by part number: 9672521
50.	614-4020	[4]	BOLT,Hex, M4 x 0.7 x 20mm, Cl 8.8, Full Thd	CAS Superseded by part number: 412255
51.	86619565	[1]	SUPPORT	NH Net Only
52.	237980	[1]	WIRE CLAMP,11.11mm, Coat, 7.14mm Bolt Hole, P Type	NH 7/16" x 1/4" Bolt
54.	86613601	[1]	WASHER,14.88mm ID x 28.69mm OD x 7.35mm Thk	NH Urethane