(RBX561) - CASE IH ROUND BALER (12/01-8/02) (038) - NET WRAP, DUCKBILL & KNIFE ARM Case Agriculture

发表于 2022-10-23 03:10:02

0次 0 0

Pos.	Part No	Qty	Parts name	Comments
1.	86636759	[1]	GUIDE	NH Upper
2.	86637230	[1]	ROLLER	NH Spreader
3.	86637200	[1]	ARM	NH
4.	86628668	[1]	ARM	NH
5.	86637199	[1]	BAFFLE	NH Lower
6.	9841760	[1]	SHIELD	NH
7.	86636988	[2]	HUB	NH Pivot
8.	86636773	[1]	PLATE	NH RH
9.	86636999	[1]	PLATE	NH RH
10.	86504967	[2]	DRIVE BUSHING,19.16mm ID x 25.48mm OD x 12.7mm L	NH
11.	86637001	[1]	PLATE	NH LH, Includes: Ref. 10
12.	86636772	[1]	PLATE	NH Bearing Mount, LH
13.	9805963	[1]	SHIELD	NH
14.	86636774	[1]	PLATE	NH
15.	9806864	[3]	KNIFE,382mm L x 38.1mm W x 3.4mm Thk	NH
16.	86628105	[1]	SUPPORT	NH Knife
17.	832-10410	[11]	NUT,M10 x 1.5, Cl 8	CAS Superseded by part number: 190003888452
18.	58225	[11]	WASHER,10.32mm ID x 31.8mm OD x 3.45mm Thk	NH Special, 1-1/4" OD Superseded by part number: 87654824
19.	102043	[11]	GROMMET,19.05mm ID x 34.925mm OD x 11.11mm Thk	NH
20.	86622552	[2]	SHIELD	PA
21.	86517336	[2]	SUPPORT	NH Roller Superseded by part number: 87643130
22.	27291	[2]	BALL BEARING,20mm ID x 47mm OD x 14mm W	NH Superseded by part number: 84330054
23.	495-21031	[2]	WASHER,1/4"	CAS Superseded by part number: 80701, 72187262
24.	832-46406	[2]	NUT,M6 x 1, Cl 8	CAS Superseded by part number: 353308
25.	844-6016	[9]	BOLT,Hvy Hex, M6 x 16mm, Cl 8.8	CAS Superseded by part number: 9804255
26.	76028	[2]	WASHER,9/32" x 1" x .06" Thk	NH
27.	87846	[2]	HEX SOC SCREW,FLAT, 3/8" - 24 x 1-3/4"	NH
28.	280760	[2]	HEX SOC SCREW,FLAT, 3/8" - 16 x 1-1/2"	NH
29.	86636722	[2]	SPACER,12.62mm ID x 19.05mm OD x 15.75mm L	NH
30.	86512444	[4]	CARRIAGE BOLT,M8 x 1.25 x 40mm, Full Thd, Cl 8.8	NH
31.	280736	[4]	NUT,5/16"-18, GC	NH
32.	61-33148	[4]	HEX SOC SCREW,5/16"-18 x 3"	CAS Superseded by part number: 86625208
33.	492-11031	[6]	LOCK WASHER,5/16"	CAS Superseded by part number: 83990583
34.	825-1408	[5]	NUT,M8, Cl 8	CAS Superseded by part number: 43362
35.	495-21044	[1]	WASHER,3/8"	CAS Superseded by part number: 87779090, 80702
36.	492-11038	[2]	LOCK WASHER,3/8"	CAS Superseded by part number: 80680, 72187249
37.	232-4146	[3]	NUT,3/8"-16, GC	CAS Superseded by part number: 88902
38.	905-10020	[4]	BOLT,Hex Flg, M10 x 20mm	CAS Superseded by part number: 274249
39.	86637237	[1]	WASHER	NH 1-1/8" OD, .135" Thick
40.	825-5148	[8]	SERRATED NUT,M8, Flg Ser	CAS Superseded by part number: 86505868
41.	412430	[8]	CARRIAGE BOLT,Sq Nk, M8 x 1.25 x 16mm, Cl 8.8, Full Thd	NH
42.	614-8020	[6]	BOLT,Hex, M8 x 1.25 x 20mm	CAS Superseded by part number: 120104
43.	495-21038	[9]	WASHER,5/16"	CAS Superseded by part number: 80664, 72187263
44.	495-21056	[1]	WASHER,1/2"	CAS Superseded by part number: 72187265, 80700
45.	140046	[1]	BELLEVILLE WASHER,M12 Bolt Size x 27mm OD x 1.8mm Thk	NH
46.	829-1412	[3]	NUT,M12, Cl 10.9	CAS Superseded by part number: 337475
47.	9706703	[2]	CARRIAGE BOLT,Sht Sq Nk, M6 x 1 x 20mm, Cl 8.8, Full Thd	NH
48.	322357	[1]	BELLEVILLE WASHER,M6 Bolt Size x 14mm OD x 1.3mm Thk	NH
49.	825-1406	[19]	NUT,M6, Cl 8	CAS Superseded by part number: 86500688
50.	131522	[1]	SPACER	NH Split
51.	86636876	[1]	SHAFT	NH
52.	794034	[1]	WASHER,20.96mm ID x 28.7mm OD x 1.7mm Thk	NH