(RBX562) - CASE IH ROUND BALER (9/02-7/05) (14.33) - BELT TENSION Case Agriculture

发表于 2022-10-25 03:10:01

0次 0 0

Pos.	Part No	Qty	Parts name	Comments
1.	86637229	[4]	LINK,489mm L	NH
2.	86636659	[2]	SPACER,10.28mm ID x 15.85mm OD x 21.84mm L	NH .86" L, HT, Plated
3.	32406	[4]	SPACER,25.9mm ID x 31.5mm OD x 16.8mm L	NH .66" L
4.	86637228	[2]	PIN,38.1mm OD x 91.5mm L	NH
5.	86636552	[2]	BEARING CAP	NH
6.	86516321	[2]	SUPPORT	NH Superseded by part number: 87654791
7.	86640113	[1]	ARM	NH
8.	86516322	[2]	SUPPORT	NH Superseded by part number: 87654792
9.	86500664	[1]	ROLLER	NH Rear Serpentine Superseded by part number: 84601409
10.	9842174	[1]	ROLLER	NH Front Serpentine Superseded by part number: 84600584
11.	9608250	[1]	SHAFT	NH
12.	621339	[2]	SPRING	NH Use W/ Ref. 46 & 47
13.	9617265	[2]	BAND	NH
14.	NSS	[1]	NOT SOLD SEPARAT	CON Hydraulics
15.	9846489	[1]	SPRING,Compression, 1.81" OD x 9.44" L	NH
16.	226131	[1]	PIVOT	NH Superseded by part number: 87654703
17.	857072	[1]	GAUGE	NH 3,000 PSI, Bale Density
18.	86627339	[1]	HYD CONNECTOR	NH -04, Female, NPTF Superseded by part number: 87016920
19.	9845229	[1]	COUPLING	NH Male
20.	515-22159	[2]	CLAMP,5/8", Insul, 5/16" Bolt	CAS Superseded by part number: 9706748
21.	825-2408	[2]	FLANGE NUT,M8 x 1.25, Flg, Cl 8	CAS Superseded by part number: 86505868
22.	633038	[2]	THREADED ROD,3/4" - 10 x 11-1/2" L	NH
23.	844-8040	[2]	BOLT,Hvy Hex, M8 x 40mm, Cl 8.8	CAS Superseded by part number: 86511842
24.	844-10050	[2]	BOLT,Hvy Hex, M10 x 50mm, Cl 8.8	CAS Superseded by part number: 16587625
25.	86627635	[4]	BOLT,Hex, M12 x 1.75 x 30mm, Cl 10.9	NH Cap, HH, CL 8.8 P M12 x 30, 6.5 Head Height
26.	515-23127	[4]	CLAMP,1/2", Insul, 3/8" Bolt	CAS Superseded by part number: 86010402
27.	844-12045	[4]	BOLT,Hvy Hex, M12 x 45mm, Cl 8.8	CAS Superseded by part number: 9804268
28.	381014	[2]	SCREW,Flng, M8 x 16mm	NH HWH, M8 x 1.25 x 16
29.	811-8030	[1]	CARRIAGE BOLT,Sht Sq Nk, M8 x 1.25 x 30mm, Cl 8.8	CAS
30.	257163	[2]	WASHER,25.4mm ID x 50.8mm OD x 4.17mm Thk	NH Hardened, .164" Thk
31.	28581	[8]	WASHER,38.9mm ID x 60.3mm OD x 3.5mm Thk	NH 1-17/32" ID x 2-3/8" OD Superseded by part number: 86611730
32.	495-11053	[4]	WASHER,1/2", SAE	CAS Superseded by part number: 87364, 72187259
33.	495-21081	[2]	WASHER,3/4"	CAS Superseded by part number: 86511191
34.	495-11106	[4]	WASHER,1", SAE	CAS Superseded by part number: 87367
35.	495-21038	[4]	WASHER,5/16"	CAS Superseded by part number: 80664, 72187263
36.	86637242	[2]	CLAMP	NH
37.	425-1012	[2]	NUT,3/4"-10, G5	CAS Superseded by part number: 280954
38.	425-1014	[1]	NUT,7/8"-9, G5	CAS Superseded by part number: 9849647
39.	87314	[1]	JAM NUT,Jam, 7/8"-9, G2	NH
40.	832-46410	[2]	NUT,M10 x 1.5, Cl 8	CAS Superseded by part number: 100037
41.	832-46412	[4]	NUT,M12 x 1.75, Cl 8	CAS Superseded by part number: 100038
42.	832-46408	[2]	NUT,M8 x 1.25, Cl 8	CAS Superseded by part number: 86528579
44.	432-1228	[1]	COTTER PIN,3/16" x 1 3/4"	CAS Superseded by part number: 87399
45.	432-1232	[4]	COTTER PIN,3/16" OD x 2" L	CAS Superseded by part number: 87400
46.	854482	[2]	SPRING NUT	NH Spring
47.	143672	[2]	SPRING NUT	NH Spring
48.	838-5526	[1]	LOCK PIN,M5 x 26, Slotted	CAS Superseded by part number: 82848074, 130045
49.	8050825	[2]	BEARING, ROLLER, CYL,38.1 mm ID x 80 mm OD x 30.163 mm	L Superseded by part number: F82059
50.	322357	[1]	BELLEVILLE WASHER,M6 Bolt Size x 14mm OD x 1.3mm Thk	NH
51.	844-6020	[1]	BOLT,Hvy Hex, M6 x 20mm, Cl 8.8	CAS Superseded by part number: 9804256
52.	844-8020	[1]	BOLT,Hvy Hex, M8 x 20mm, Cl 8.8	CAS Superseded by part number: 9804258
53.	825-1406	[1]	NUT,M6, Cl 8	CAS Superseded by part number: 86500688
54.	86500662	[2]	BEARING ASSY	NH
55.	322358	[1]	BELLEVILLE WASHER,M8 Bolt Size x 18mm OD x 1.4mm Thk	NH