(BTX11) - CASE IH BALE THROWER (1/02-) (70.280.05) - DRIVES Case Agriculture

发表于 2022-11-05 03:10:02

0次 0 0

Pos.	Part No	Qty	Parts name	Comments
1.	86633902	[1]	SHIELD	PA Superseded by part number: 84134271
2.	86641496	[1]	SHEAVE	NH
3.	86641495	[1]	SHEAVE	NH
12.	65383	[1]	CLIP	PA Superseded by part number: 86836908
13.	86629516	[1]	SHEAVE	NH
14.	86836864	[1]	SPRING	NH
15.	9601450	[1]	SUPPORT	NH
21.	86640801	[1]	SPACER,13.1mm ID x 25.53mm OD x 41.27mm L	NH
26.	214517	[1]	PULLEY	PA Superseded by part number: 86640851
27.	86626199	[1]	BALER FLYWHEEL	NH
28.	86634492	[1]	V-BELT,0.66" W x 115.00" L	NH
31.	86640800	[2]	SPACER	NH
32.	291525	[1]	BRACKET	NH Superseded by part number: 2977092, 2977092, NH291525
40.	87479	[2]	KEY	NH 1/4" x 1-1/2", for 0.98" ID sheave, included in 86517694 Kit for Machines BSN 814645 Superseded by part number: GD-560
40.	87483	[1]	KEY,0.31" x 1.5" L	NH 5/16" x 1-1/2", for 1.00" ID sheave, included in 86517695 Kit for machines Between SN 814646 & 898625 , used on & ASN 898625
42.	80438	[2]	SET SCREW,Hex Soc, 1/4"-20 x 3/8"	GI Superseded by part number: 301420S36
43.	9626568	[2]	JAM NUT,Jam, 5/16"-18, G2	NH
49.	120104	[7]	BOLT,Hex, M8 x 1.25 x 20mm, Cl 8.8	NH
51.	322358	[6]	BELLEVILLE WASHER,M8 Bolt Size x 18mm OD x 1.4mm Thk	NH
52.	9706690	[6]	NUT,M8 x 1.25, Cl 8	NH Superseded by part number: 43362
55.	86629542	[1]	NUT,M8 x 1.25, Cl 8.8	ZED
59.	88971	[2]	SET SCREW,5/16" - 18 x 1"	PA
63.	9706693	[1]	BOLT,M12 x 60mm, Cl 8.8	NH
64.	9706717	[1]	BOLT,Hex, M12 x 1.75 x 70mm, Cl 8.8	NH
66.	87364	[3]	WASHER,0.53" ID x 1.06" OD x 0.1" Thk	NH
67.	140046	[2]	BELLEVILLE WASHER,M12 Bolt Size x 27mm OD x 1.8mm Thk	NH
68.	9706685	[2]	NUT,M12 x 1.75, Cl 8	NH
106.	120103	[4]	BOLT,M8 x 1.25 x 16mm, Cl 8.8	NH Superseded by part number: 16043224