(110) - CASE IH QUADROBALE BALER (1/96-12/98) (031) - KNOTTER PLATE Case Agriculture

发表于 2022-11-05 03:10:02

0次 0 0

Pos.	Part No	Qty	Parts name	Comments
1.	2154410	[4]	SPLIT PIN/SAFETY PIN	R Tensioning pin 3 x 26
2.	2356472	[4]	SPLIT PIN/SAFETY PIN	R Tensioning pin
3.	8166750	[4]	CONTROL LEVER	R Gear lever mit Pos. 4
4.	2155040	[4]	JOINT	R Angular joint Bs 13x10
5.	43362	[12]	NUT,M8 x 1.25, Cl 10	BHB M8, Cl 10
6.	8166951	[4]	ROD	R Threaded rod
7.	98-029447	[8]	WASHER	FO Contact washer A 8 Superseded by part number: 322358
8.	2449641	[4]	KNUCKLE JOINT	R Angular joint Asl13
10.	0000580	[4]	SHORT SHAFT	R Shaft
11.	0000560	[4]	BEARING CARRIER	R Bearing
12.	2342111	[1]	WASHER	R
13.	0000201	[4]	WASHER	R
16.	0000572	[4]	FINGER	R Twine finger ass.
17.	614-10030	[8]	BOLT,Hex, M10 x 1.5 x 30mm, Cl 8.8, Full Thd	IH Hex, M10 x 30; 8.8 Superseded by part number: 43140
. .	100016	[8]	NUT,M10 x 1.5, Cl 8	NH
. .	98-029441	[8]	WASHER	FO Contact washer A10 Superseded by part number: 140045
18.	8176410	[4]	SCREW	R Threaded bolt
20.	8166531	[4]	GUIDE	R Twine guide
21.	932336R1	[8]	LOCK PIN,M5 x 16, Slotted	IH Tensioning pin 5 x 16 Superseded by part number: 14600670
22.	8162251	[4]	LARGE PLATE	R Plate
24.	614-8025	[4]	BOLT,Hex, M8 x 1.25 x 25mm, Cl 8.8, Full Thd	CAS Superseded by part number: 43127
25.	2394420	[4]	SCREW	R Flat head bolt M 8x 12
26.	8166745	[4]	LARGE PLATE	R Knot plate
27.	2440040	[8]	SPLIT PIN/SAFETY PIN	R Tensioning pin 14 x 20
28.	930051R1	[4]	BOLT,Hex, M10 x 1.5 x 40mm, Cl 8.8	IH Hexagonal screw M10x 40 Superseded by part number: 120112
. .	930111R1	[4]	BOLT,Hex, M10 x 1.5 x 45mm, Cl 8.8	IH Hexagonal screw M10x 45 Superseded by part number: 56614