(27) - INTERNATIONAL HARVESTER RECTANGULAR BALER (1/65-12/68) (C-27) - POWER TAKE-OFF DRIVE SHAFTS, TWO KNUCKLES Case Agriculture
Pos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
2. | 455347R1 | [1] | VALVE SPRING | IH SPRING, lock pin unit Superseded by part number: 237924A1 |
3. | 661406R1 | [1] | LOCK WASHER,4.83mm ID x 18.542mm OD x 1.65mm Thk | IH X lock |
4. | 455346R21 | [1] | PIN | IH lock unit Superseded by part number: 237924A1 |
6. | 568100R92 | [1] | YOKE | IH W/QA PIN Superseded by part number: 568100R93 |
7. | 576420R1 | [8] | RING | IH brg retainer snap |
8. | 569044R91 | [8] | BEARING ASSY | IH ASSY, cross Superseded by part number: 84355319 |
10. | 80711 | [2] | LUBE NIPPLE,65 Degree, 1/8" NPT x 7/8" lg | NH FITTING, 1/8-27 65 deg lub |
11. | 569047R91 | [2] | REPAIR KIT | IH KIT, cross service Superseded by part number: 200464C91 |
12. | 667816R91 | [1] | YOKE | IH & SHAFT ASSY, rectangular |
13. | 613436R1 | [2] | CLAMP | IH RING, snap Superseded by part number: 56760 |
14. | 613437R1 | [2] | THRUST WASHER,62.2mm ID x 71.12mm OD x 1.7mm Thk | IH thrust |
15. | 464920R1 | [2] | NYLON BEARING,2.08" ID x 2.8" OD x 0.38" | IH nylon, replaces 613439R1 Superseded by part number: 47941, 579113 |
16. | 668405R91 | [1] | SHIELD | IH outer |
17. | 670708R1 | [1] | P SHIELD ASSY, inner | |
19. | 19688R1 | [1] | LUBE NIPPLE,1/4"-28 x .44" lg | IH FITTING, 1/4-28 str lub Superseded by part number: 88775 |
20. | 667817R91 | [1] | YOKE | IH ASSY, tube & sleeve |
21. | 670707R11 | [1] | P YOKE ASSY, flange | |
22. | 87414 | [1] | LUBE NIPPLE,1/4" - 28 | NH FITTING, 1/4-28 self-tap. lub |
23. | 670706R91 | [1] | P SHAFT ASSY, main rear drive | |
24. | 668370R91 | [1] | JOINT | IH SHAFT ASSY, tractor half drive Superseded by part number: 668370R92 |