(RBX451) - CASE IH ROUND BALER (12/01-10/02) (039) - TWINE CUT-OFF Case Agriculture

发表于 2022-10-21 03:10:06

0次 0 0

Pos.	Part No	Qty	Parts name	Comments
1.	86559592	[1]	SPRING,Extension, 0.99" OD x 6-1/4" L	NH Extension
2.	42622	[1]	SPRING	NH 1-1/2" Lg. Superseded by part number: 86976005
3.	86636790	[1]	PLATE	NH
4.	9848747	[1]	SPACER	NH Superseded by part number: 87023417
5.	86636646	[2]	ROD	NH
6.	86636764	[1]	SHAFT	NH
7.	86636765	[1]	TUBE	NH Includes: (2) Ref. 8
8.	86636770	[1]	TUBE	NH
9.	623796	[2]	ROD	NH L Bolt
10.	86636771	[2]	ANGLE	NH Superseded by part number: 87690626
11.	617945	[2]	KNIFE SECTION	NH Twine Cutting
12.	608566	[2]	NYLON BEARING,26.56 mm ID x 14 mm	NH Bearing Superseded by part number: 87051636
13.	86636634	[1]	CLAMP	NH
14.	86636638	[1]	HUB	NH
15.	86628312	[1]	ANGLE	NH RH
16.	86628311	[1]	ANGLE	NH LH
17.	432-812	[2]	COTTER PIN,3/4" OAL x 1/8" W	CAS Superseded by part number: 80756
18.	432-824	[1]	COTTER PIN,1/8" x 1 1/2"	CAS Superseded by part number: 80708
19.	432-1220	[1]	COTTER PIN,3/16" x 1 1/4"	CAS Superseded by part number: 87398
20.	814-10050	[1]	BOLT,Hex, M10 x 1.5 x 50mm, Cl 8.8	CAS Superseded by part number: 120069, 47110242
21.	614-8020	[1]	BOLT,Hex, M8 x 1.25 x 20mm	CAS Superseded by part number: 120104
22.	614-10020	[1]	BOLT,Hex, M10 x 1.5 x 20mm, Cl 8.8, Full Thd	CAS Superseded by part number: 43138
23.	811-6016	[2]	CARRIAGE BOLT,Sht Sq Nk, M6 x 1 x 16mm, Cl 8.8	CAS Superseded by part number: 86512439
24.	413-644	[1]	BOLT,Hex, 3/8" - 16 x 2-3/4", Gr 5	CAS Superseded by part number: 88444
25.	461-33120	[1]	HEX SOC SCREW,5/16"-18 x 1 1/4"	CAS Superseded by part number: 280699
26.	495-21044	[8]	WASHER,3/8"	CAS Superseded by part number: 87779090, 80702
27.	495-21069	[1]	WASHER,5/8"	CAS Superseded by part number: 80299
28.	58225	[1]	WASHER,10.32mm ID x 31.8mm OD x 3.45mm Thk	NH Special, 1-1/4" OD Superseded by part number: 87654824
29.	285072	[2]	WASHER,10.3mm ID x 22.2mm OD x 2.7mm Thk	NH (3/8")
30.	280736	[1]	NUT,5/16"-18, GC	NH
31.	495-11106	[1]	WASHER,1", SAE	CAS Superseded by part number: 87367
32.	825-5146	[1]	SERRATED NUT,M6, Flg Ser	CAS Superseded by part number: 86511444
33.	825-5148	[1]	SERRATED NUT,M8, Flg Ser	CAS Superseded by part number: 86505868
34.	825-51410	[1]	FLANGE NUT,M10, Flg Ser	CAS Superseded by part number: 43435
35.	832-46410	[2]	NUT,M10 x 1.5, Cl 8	CAS Superseded by part number: 100037
36.	425-105	[3]	NUT,5/16"-18, G5	CAS Superseded by part number: 9635082, 72187221
37.	425-106	[4]	NUT,3/8"-16, Cl 5	CAS Superseded by part number: 9628503
39.	26402	[1]	WASHER,25.8mm ID x 38.1mm OD x 1.7mm Thk	NH (.060" Thk, 1-1/2" OD)
40.	614-10030	[2]	BOLT,Hex, M10 x 1.5 x 30mm, Cl 8.8, Full Thd	IH Superseded by part number: 43140
41.	905-10025	[1]	BOLT,Hex Flg, M10 x 25mm	CAS Superseded by part number: 274251
42.	617768	[2]	BUSHING	NH