(BTX11) - CASE IH BALE THROWER (1/02-) (70.280.13) - HYDRAULIC DIRECTION CONTROL Case Agriculture

发表于 2022-11-05 03:10:02

0次 0 0

Pos.	Part No	Qty	Parts name	Comments
1.	86634424	[1]	CYLINDER ASSY.	NH Hydraulic, Directional Control, Serial Range: Refer-Fig.013(1) Superseded by part number: 87019620
1.	87019621	[1]	HYDRAULIC CYLINDER,Double Acting, 28.57mm Rod, 152.4mm Stroke	PA Directional Control, Refer to Fig. 013(2) Superseded by part number: 87019620
2.	705914	[1]	ORIFICE	NH
3.	26282	[1]	PIN	NH 1/2" x 1-1/2"
4.	86633928	[1]	PIN	NH
. .	614-8030	[1]	BOLT,Hex, M8 x 1.25 x 30mm, Cl 8.8, Full Thd	CAS Superseded by part number: 43128
. .	492-11031	[1]	LOCK WASHER,5/16"	CAS Superseded by part number: 83990583
. .	825-1408	[1]	NUT,M8, Cl 8	CAS Superseded by part number: 43362
5.	218-5105	[2]	ELBOW,90 Degree Elbow, 9/16" - 18 Male JIC x 9/16" - 18 Male ORB	CAS Superseded by part number: 76344, 72186128
6.	237-6006	[2]	O-RING,0.078" Thk x 0.468" ID, -906, Cl 6, 90 Duro	CAS Superseded by part number: 9617873
7.	9619437	[2]	FLEXIBLE HOSE,0.25" ID x 336.00", SAE 100R1	NH
. .	87572	[2]	BUSHING	MKT 1/2" x 3/8" Superseded by part number: 86625018
8.	263117	[1]	CABLE TIE,292.1mm L, Nylon, Black	NH CABLE STRAP
9.	86633924	[1]	BRACKET	NH
. .	435-1828	[8]	GROOVED PIN,1/4" x 1 3/4", Type A	NH Superseded by part number: 84064
. .	394818	[1]	COTTER PIN,M5 x 25	NH
. .	614-10020	[4]	BOLT,Hex, M10 x 1.5 x 20mm, Cl 8.8, Full Thd	CAS Superseded by part number: 43138
. .	140045	[4]	BELLEVILLE WASHER,M10 Bolt Size x 22mm OD x 1.6mm Thk	NH
. .	825-1410	[4]	NUT,M10, Cl 8	CAS Superseded by part number: 100016
10.	86630098	[1]	CLAMP	NH Incl: Ref. 11 & 12
11.	207705	[1]	CLAMP,15.8mm ID	NH
12.	PL	[1]	PROCURE LOCALLY	BAS Nut, Wing